E-flite esc programming software

If the wires are reversed, the ESC may be damaged. Reversing polarity will void your warranty, so always double-check this connection. The throttle lead connects to the throttle channel on your radio receiver.

You should always treat the motor and propeller as live and dangerous, remembering it could start at any time, and keep any body parts, clothing and tools clear of the propeller arc. When flying in hot weather, we recommend checking on the condition of the ESC, battery, and motor after each flight. You may want to consider letting the electronic components cool to near ambient temperature between flights.

We also recommend throttle management when running near maximum levels of current draw during extreme conditions. It is not recommended you fly an entire flight at full throttle. If this is done, it is possible to cause permanent damage to your motor, battery, and ESC.

The controller will indicate the soft cutoff voltage setting every time you plug the battery in by first emitting a low, long tone, to indicate startup. Proper air cooling is required during flights so the ESC should be place in an area where air flows over the controller.

Connecting the ESC to the Motor. The three wires from your motor connect to the three female gold bullet connectors on the ESC. The order of connection to the motor is not important; you can plug any motor wire into any connector. When you test the system, the motor runs backwards, you can simply unplug and switch any two of the motor wire plugs connected to the ESC.

Mounting the ESC. Choose a location that has good airflow and offers good protection. Do not. E-flite manuals. Text mode Original mode 1 2 3 4. It is capable of up to 40 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard- sized servos with the BEC on any recommended input voltage. Digital servos and binding servos of any kind typically have higher current draw. As a general rule, micro and sub-micro servos draw less current which may affect your servo usage as shown in the examples above.

Also, always be sure to position the ESC for maximum airflow since cooling can significantly aid in the performance of the BEC. When operating with the BEC disabled, E-flite recommends the use of a separate, high-power, external BEC like the Ultimate BEC , or receiver pack and switch using the following items to ensure trouble-free operation: 1.

Mounting the ESC Choose a location that has good airflow and offers good protection. Pages: 1 2 3 4. Horizon reserves the right to change or modify this warranty at any time without notice. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.

Inspection or Services If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization RMA number.

Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection.

Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours.

When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service.

In addition you will be billed for return freight. If received, a non-compliant Product will not be serviced. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States: Electronics and engines requiring inspection or repair should be shipped to the following address: Horizon Service Center Fieldstone Road Champaign, Illinois All other Products requiring warranty inspection or repair should be shipped to the following address: Horizon Product Support Fieldstone Road Champaign, Illinois Please call or e-mail us at productsupport horizonhobby.

France: Electronics and engines requiring inspection or repair should be shipped to the following address:. China: Electronics and engines requiring inspection or repair should be shipped to the following address:. Horizon Hobby — China Room , No. Shanghai, China Product Registration Find a Retailer News.

Where To Buy. Features Key Features Up to amp continuous current with proper airflow, amp peak 5-volt switch-mode BEC circuit capable of 2. Bulletins Some instructions sheets included with these ESCs had some incorrect information under Programming Menu 7, 2, a and b.

The corrected instructions are listed below. Programming Menu 7 — Operating Mode The default setting is set to Normal airplane Mode, which is limited to a start-up rate of 0. When operating with the BEC disabled, E-flite recommends the use of a separate, high-power, external BEC or a receiver pack and switch using the following items to ensure trouble-free operation: 1.